View Single Post


Old
  Post #4 (permalink)   01-30-2010, 09:03 PM
brybert
HD Amateur
 
Join Date: Sep 2009
Posts: 83

Status: brybert is offline
Hi!
I have updated several things...

I will start out with 4GB RAM 800Mhz DC

I learned some very bad things about ultra..so I'm shooting for a corsair PSU if budget allows.

This was just a spur of the moment thing..to be honest, Mr. Handsonhosting.

I have not built a system from scratch in years..but..the original plan was to get a Vid card for this poor frankenstein PC of mine...which is clearly on it's way out.

Prices were so low I quickly abandoned that idea for a complete rebuild. Use the parts I have around..then buy better components as possible.

You may not believe it..but newegg has quoted me $155 for the mobo, proc and fan..which is...amazing!

I did have a question about the EPS connetor being 8 pin and the normal ATX connector on the modo being 4 pins.
I have emailed them. I don't like surprises.

As far as RAM..I honestly believe these two modules sitting here will suffice..and I have a good inventory of hard drives...at least just to get a complete system up and running.

Just take a look at this mobo:

http://usa.asus.com/product.aspx?P_ID=ef0qgvMIwOUagAVl

Wheee!

Bryon
System Builder In-training

Last edited by brybert : 01-30-2010 at 09:16 PM.